Overhead Door: The Genuine. The Original.
Overhead Door Company of Southwestern Idaho
Overhead Door Company of Lewiston-Clarkston
Overhead Door Company of Nampa
Overhead Door Company of New Plymouth
Overhead Door Company of Mountain Home
Overhead Door Company of Spokane-Coeur d’Alene
Overhead Door Company of Twin Falls

Commercial Operator Accessories

Timer to Close Module

Available for RMX®, RSX®, RHX™, and CDX™ Operators

Provides an automatic door closing feature that is easily installed and automatically recognized by the operator system. The Timer to Close feature can be selected to start when the door is opened from inputs such as the open button on the wall control, optional radio control input or auxiliary open input via an optional device. The module is installed in the operator electronic box and connects to the main circuit board through an expansion port connector.

Key Features

  • User-selectable time delay
  • Timer hold input
  • Auxiliary open input
  • Auxiliary reversing inputs
  • A sensing device must be used with this module
Timer To Close Brochure (PDF)

Auxiliary Output

Auxiliary Output Module for RMX®, RSX®, and RHX™ Operators

Expand the features of your X-Series Commercial Operator to integrate with other devices such as lights, monitoring systems and more with the Auxiliary Output Module. This optional component board provides dry relay contacts at door limit positions, as well as lamp output contacts and a selectable Americans with Disabilities Act output to sound a horn or run a flashing light. The module is installed in the operator electric box and connects to the main circuit board through an expansion port connector.

Key Features

  • Allows for integration into other devices (lights, horns, monitoring systems)
  • Multiple relay contact points (up limit, down limit, mid-stop limit)
Auxillary Output Module Brochure (PDF)

Interface Module

Available for RHX®, RSX®, RMX®, RDX®, and CDX™ Operators

The UL 325 2010 compliant Monitored Edge Interface Module allows the operator to monitor the sensing edge; providing advanced safety and security to the door system. This module serves as an interface between two-wire monitored sensing edges and our X-Series operators. The module installs easily and is automatically recognized by our operators.

To maintain UL 325 2010 compliance when using a sensing edge as a primary safety device you must use one of the following modules: Monitored Edge Interface Module or Timer To Close Module

Key Features

  • UL 325 2010 certified for use with our UL 325 2010 certified X-Series commercial operators
  • Compatible for use on Miller Edge electronic two-wire monitored edges models ME, MT, and MU

RDX® Interface Module

Interface Module for the RDX® Operator

The optional interface module is designed to allow Overhead Door® standard radio remote control receivers, additional open/close/stop receivers or single button input to operate with RDX® control units.

Receivers

Receivers for the RDX® Operator

The RDX® Commercial operator works with the Horton type (9-Switch Trinary) fixed code receiver and the dual frequency CodeDodger® Rolling Code Receiver. These receivers work with one, two, three and four-button transmitters.

Radio Transmitters

Transmitters for the RDX®, RMX®, RSX®, and RHX™ Operators

Overhead Door commercial radio transmitters are available in the same frequency as your selected transmitter receiver. One, two, three and four button transmitters work with the system and are available in frequencies of 312, 360, 380, and 390 MHz.

Covers

Cover for the RDX® Operators

A sleek cover designed for standard and medium duty RDX® operator models is available to provide additional elements such as dust, dirt, and debris. The classic look is sure to complement any facility. Comes in two forms, standard and hoist version, designed for the RDX® S-H Operators.

Bottom Sensing Edge

Bottom Sensing Edge for RMX®, RSX®, and RHX™ Operators

Sensing Edges provide entrapment protection for motor-operated doors by offering an auto reverse or auto stop feature. Attached to the leading edge of motor-driven doors, our electrically activated Sensing Edges offer the most reliable reversing feature available. Our exclusive construction contains two completely flexible, conductive contact elements separated by perforated foam. When touch-activated, the soft foam cushion inside the Sensing Edge compresses, causing the internal contacts to meet and immediately send an electrical signal to stop or reverse the motor. As an added feature, the Sensing Edge provides a secure, weather-tight seal and conforms to the floor surface. Sensing Edges allow for added safety and peace of mind.

Safety Beams

Safety Beams for RMX®, RSX®, and RHX™ Commercial Opeartors

This optional safety device, our Safe-T-Beam® senses an obstruction and signals the operator to stop or reverse the door. These STBs are UL325 compliant and listed to be used with our X-series operators.

RDX® Solenoid Lock

Lock of Commercial RDX® Operator

The RDX® commercial operator is designed to offer safe operation without damaging the door while employing a standard slide lock as the main locking system. The auto-lock is an integrated electronic solenoid-operated bolt locking system that provides an extra measure of security for doors that require radio control operation.